Saro
Saro
SARO Machine cabinet with raised edge and sliding doors 1000x700x750mm AISI 304- Made from AISI304 stainless steel - Stainless steel work surface with 18 mm MDF board - Sliding doors without a key - A reinforced, adjustable shelf - 3 positions - Adjustable stainless steel feet - Upstand, H 200 × D 20 mm - Dimensions: W 1000 x D 700 x H 750 mm - Weight: 66kg
1.012,98
Saro
SARO Basic shelf unit 1200 x 600 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 1200 x D 600 x H 1800 mm - Weight: 33 kg
903,16
Saro
SARO Machine cabinet with raised edge and sliding doors 2000x700x750 mm AISI 430- Made from AISI430 stainless steel - Stainless steel work surface with 18 mm MDF board - Sliding doors without a key - A reinforced, adjustable shelf - 3 positions - Adjustable stainless steel feet - Upstand, H 200 × D 20 mm - Dimensions: W 2000 x D 700 x H 750 mm - Weight: 97kg
1.148,95
Saro
SARO Add-on shelf 975 x 600 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 975 x D 600 x H 1800 mm - Weight: 24 kg
593,16
Saro
SARO Basic shelf unit 1000 x 600 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 1000 x D 600 x H 1800 mm - Weight: 29 kg
773,47
Saro
SARO Basic shelf unit 1200 x 500 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 1200 x D 500 x H 1800 mm - Weight: 33 kg
861,37
Saro
SARO Machine cabinet with raised edge and sliding doors 1600x700x750mm AISI 430- Made from AISI430 stainless steel - Stainless steel work surface with 18 mm MDF board - Sliding doors without a key - A reinforced, adjustable shelf - 3 positions - Adjustable stainless steel feet - Upstand, H 200 × D 20 mm - Dimensions: W 1600 x D 700 x H 750 mm - Weight: 83.5 kg
1.001,88
Saro
SARO Machine cabinet with raised edge and sliding doors 1500x700x750 mm AISI 430- Made from AISI430 stainless steel - Stainless steel work surface with 18 mm MDF board - Sliding doors without a key - A reinforced, adjustable shelf - 3 positions - Adjustable stainless steel feet - Upstand, H 200 × D 20 mm - Dimensions: W 1500 x D 700 x H 750 mm - Weight: 81 kg
1.062,66
Saro
SARO Machine cabinet with raised edge and sliding doors 1200x700x750 mm AISI 430- Made from AISI430 stainless steel - Stainless steel work surface with 18 mm MDF board - Sliding doors without a key - A reinforced, adjustable shelf - 3 positions - Adjustable stainless steel feet - Upstand, H 200 × D 20 mm - Dimensions: W 1200 x D 700 x H 750 mm - Weight: 71.5 kg
925,26
Saro
SARO Machine cabinet with raised edge and sliding doors 1000x700x750 mm AISI 430- Made from AISI430 stainless steel - Stainless steel work surface with 18 mm MDF board - Sliding doors without a key - A reinforced, adjustable shelf - 3 positions - Adjustable stainless steel feet - Upstand, H 200 × D 20 mm - Dimensions: W 1000 x D 700 x H 750 mm - Weight: 66kg
849,35
Saro
SARO Mobile work table, 2 levels, 1000x600x850mm, AISI304- Made from AISI304 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 2 levels - W 1000 x D 600 x H 850 mm - Weight: 38.6 kg
458,37
Saro
SARO Mobile work table, 2 levels, 800x600x850mm, AISI304- Made from AISI304 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 2 levels - W 800 x D 600 x H 850 mm - Weight: 34.9 kg
447,61
Saro
SARO Mobile work table, 2 levels, 600x600x850mm, AISI304- Made from AISI304 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 2 levels - W 600 x D 600 x H 850 mm - Weight: 31.3 kg
423,57
Saro
SARO Add-on shelf 975 x 500 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 975 x D 500 x H 1800 mm - Weight: 20 kg
560,90
Saro
SARO Mobile work table 600x600x850mm AISI304- Made from AISI304 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 1 level - W 600 x D 600 x H 850 mm - Weight: 29.4 kg
371,74
Saro
SARO Basic shelf unit 1000 x 500 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 1000 x D 500 x H 1800 mm - Weight: 26 kg
739,94
Saro
SARO Mobile work table, 2 levels, 800x600x850mm- Made from AISI430 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 2 levels - W 800 x D 600 x H 850 mm - Weight: 34.9 kg
410,29
Saro
SARO Basic shelving unit 800 x 500 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 800 x D 500 x H 1800 mm - Weight: 23 kg
684,90
Saro
SARO Add-on shelf 1175 x 400 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 1175 x D 400 x H 1800 mm - Weight: 23 kg
614,04
Saro
SARO Mobile work table 800x600x850mm- Made from AISI430 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 1 level - W 800 x D 600 x H 850 mm - Weight 32.3 kg
374,86
Saro
SARO Add-on shelf unit 775 x 400 x 1800mm 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 775 x D 400 x H 1800 mm - Weight: 15 kg
462,20
Saro
SARO Mobile work table 600x600x850mm- Made from AISI430 stainless steel, 18 mm thick - Legs made of 40 × 40 mm square tubing - Low bar and central crossbeam (height 200 mm) - 100 mm casters with galvanized fork head, two of which have brakes - 1 level - W 600 x D 600 x H 850 mm - Weight: 29.4 kg
345,00
Saro
SARO Basic shelving unit 800 x 400 x 1800mm, 4 smooth shelves- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values specified below. - Dimensions: W 800 x D 400 x H 1800 mm - Weight: 20 kg
642,51
Saro
SARO Aluminum shelf with plastic frost protection 475x1770mm- You have endless possibilities with our refrigerated shelves, whether corner units or simple freestanding shelves; you can expand them again and again. - Individually removable - Plug-in system - shelf - Dimensions: W 1770 mm x D 475 mm - Weight: 7.2 kg
100,30
