Winter holder for softening and reverse osmosis systems

Scope of delivery: 1x at excellence-s Technical data Min. Permeate: 1.5 l/min Product water yield max.: 60 % Incity temperature max: 35 ° C Conductive raw water max.: 1,200 µs/cm Raw water hardness GH max: 35 ° DH Side fluid water pressure min. 1.2 bar Performance recording: 320 W Power closing: 200-240 V / 50-60 Hz / 1.4-2.0 A Dimensions: 420 x 205 x 505 mm Weight: 22 kg Total volume of pressure boilers: 18 l The Excellence-S is a microprocessor-controlled water treatment device, which reduces the overall salt content of the passage water with the principle of reverse osmosis. When it comes to mechanical dishes and glass rinsing, the preparation of the surcharge water is a basic requirement for an optimal washing result. Always a perfect washing result. According to the manufacturer, the use of AT-Excellence-S is recommended for the UC series. Filtering of almost 100 % of the unwanted ingredients from the water. The Reveal osmosis at excellence-sis characterized by the following advantages: Aquaopt Operating state display on the machine display Plug-and-play through integrated WSE Adaption to the conditions on site Intelligent membrane switch Exemplary security concept intuitive operation Consistent service friendliness Manufacturer: Winter holder Manufacturer article number: 200V0001

Read more less

Scope of delivery: 1 Monomatics 3 incl. WSE kit Technical data Floor power: 20 l/min Water connection: 3/4 "to and down and down Wastewater and safety overflow: 1/2 " Inflow temperature max.: 50 ° C Dimensions: 570 x 260 x 505 mm Salt consumption: 0.27 kg per regeneration Regenerator duration: 10 min Weight: 12 kg Power supply: not necessary Monitoring: Control through flow quantity measurement The Winterhalter Monomatics 3 is a fully automatic, volume -controlled water hardener, which prepares hard water on the principle of the ion replacement. When it comes to mechanical rinsing of dishes, softening is a basic prerequisite for a good washing result. The water hardener essentially consists of a plastic salt container, a filter cartridge made of fiberglass and a control unit. The device is covered with a plastic lid and is provided with ¾ "screw connections. The Monomatics 3 works on the basis of the ion exchange. In the filter cartridge there is an ion exchange resin that binds the hardening of the hard-shaped calcium and magnesium ions and releases the non-hard sodium ions to the flowing water so that no lime or boiler can deposit. If the resin of the ion exchanger cartridge is exhausted, the control head automatically introduces the regeneration of the exhausted resin. The device can do without any electric connection. The device is controlled exclusively by measuring the prepared amount of water. Manufacturer: Winter holder Manufacturer article number: 20000850

Read more less

Scope of delivery: 1 te 15 cartridge Technical data Capacity at 10 ° carbon hardness: 14000 l Water inlet: 3/4 " Inflow temperature max.: 60 ° C Dimensions: 480 mm Ø 250 Weight including filter mass: 15 kg Flow water pressure: 2 - 6 bar Pressure loss: 1 bar The Winter holder Sealing TE 15 is for winter holder dishwashers with a built -in reverse osmosis system. The TE 15 essentially consists of a chrome nickel steel container and one of the regenerable ion exchanger resin. The cartridge has a removable lid and the supply and drain pipes are provided with 3/4 "screw connections. The partial salt does not require an electrical connection. Participation works according to the principle of the ion exchanger. In the filter cartridge there is an ion exchange resin that binds the hardening of the hard-shaped calcium and magnesium ions and releases the non-hard sodium ions to the flowing water so that no lime or boiler can deposit. The share of water is particularly suitable for rinsing glasses. The capacity of the ion exchanger resin is limited, which depends on the carbonate hardness of the raw water and water consumption. The regeneration display of the winter holder dishwasher shows when the exchange resin is exhausted. The cartridge is then replaced by an authorized service technician. Manufacturer: Winter holder Manufacturer article number: 5101609

Read more less