Saro

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1175 x D 600 x H 1800 mm - Weight: 28 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 775 x D 600 x H 1800 mm - Weight: 20 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 800 x D 600 x H 1800 mm - Weight: 25 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1175 x D 500 x H 1800 mm - Weight: 27 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 775 x D 500 x H 1800 mm - Weight: 17 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1200 x D 400 x H 1800 mm - Weight: 28 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 975 x D 400 x H 1800 mm - Weight: 17 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1000 x D 400 x H 1800 mm - Weight: 22 kg

Read More Fewer

- Material: Aluminum + Polyethylene (food-safe) - Fixed 300 mm platform with aluminum grids, 300 mm high, designed for heavy food items that must not be stored on the floor in the cold storage room (e.g., potato sacks, heavy fruit crates, etc.) - Dimensions: W 886 x D 475 x H 300 mm - Weight: 6.5 kg

Read More Fewer

- Material: Aluminum + Polyethylene (food-safe) - Fixed 300 mm platform with aluminum grids, 300 mm high, designed for heavy food items that must not be stored on the floor in the cold storage room (e.g., potato sacks, heavy fruit crates, etc.) - Dimensions: W 620 x D 475 x H 300 mm - Weight: 5.8 kg

Read More Fewer

- You have endless possibilities with our refrigerated shelves, whether corner units or simple freestanding shelves; you can expand them again and again. - Individually removable - Plug-in system - shelf - Dimensions: W 1964 mm x D 475 mm - Weight: 8 kg

Read More Fewer

- You have endless possibilities with our refrigerated shelves, whether corner units or simple freestanding shelves; you can expand them again and again. - Individually removable - Plug-in system - shelf - Dimensions: W 1964 mm x D 373 mm - Weight: 6.4 kg

Read More Fewer