Transport and storage / hotel

- Ideal for the counter area in supermarkets - Protection from shopping carts - Material: Plastic - Flexible solutions - End plug - Weight: 0.2 kg

Read More Fewer

- Material: (Frame) pine wood, (Board) melamine-coated MDF - Suitable for chalk and non-permanent markers - Should be protected from moisture - Weight: 4 kg

Read More Fewer

- Complete system (1 stand with integrated strap) - Automatic winding - Replaceable belt cassette - 4 possible demarcation directions - Belt: W 3000 x H 47 mm - Belt color: black - Stand: Ø 360 x H 915 mm - Weight: 8 kg - Stand color: black

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1200 x D 600 x H 1800 mm - Weight: 33 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 975 x D 600 x H 1800 mm - Weight: 24 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1000 x D 600 x H 1800 mm - Weight: 29 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1200 x D 500 x H 1800 mm - Weight: 33 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 975 x D 500 x H 1800 mm - Weight: 20 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1000 x D 500 x H 1800 mm - Weight: 26 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 800 x D 500 x H 1800 mm - Weight: 23 kg

Read More Fewer

- Material: Stainless steel 1.4301 - Shelf uprights made of 25 x 25 x 1.2 mm square tubing, cross braces made of bent flat profile 52 x 2 mm. - Permanently welded bolts 0.7 mm, spaced 150 mm apart from the support of the shelves. - Sealing of the shelf uprights by means of screw feet with height adjustment at the lower and plastic plugs at the upper tube ends. - Perforated shelves 600-1000 mm in length with 0.8 mm sheet thickness, from 1200 mm in length with 1.0 mm sheet thickness. - Staggered rows of holes, burr-free countersunk slots 40 x 15 mm - All shelves are bent by 50 mm on the long sides and 43 mm on the end sides and rabbeted inwards without burrs. - Diagonal bracing made of flat steel 25 x 2 mm/including cap nuts for fastening. Corner installation possible using stainless steel corner connection clamps. - In the case of corner construction, the load-bearing capacity of the load-bearing floors is reduced to 70% of the values ​​specified below. - Dimensions: W 1175 x D 400 x H 1800 mm - Weight: 23 kg

Read More Fewer